6:1 Zoom Ratio
A powerful 6:1 zoom ratio delivers crystal clear images from edge-to-edge throughout the entire magnification range. Many higher power scopes provide the best picture at each end of the zoom ratio, leaving the middle ranges weaker on clarity and resolution. The Leupold 6X erector system was engineered from the outset to provide consistently exceptional image quality across the entire visual field throughtout the entire zoom range. Twin Bias Spring Erector System features berylium/copper alloy leaf springs and 30% more holding force to withstand the most intense recoil and abuse.
Electronic Reticle Level
Mount the VX-6HD perfectly level using the user activated Electronic Reticle Level. The illuminated reticle will flash when the scope is at an angle of greater than one degree, and will stop flashing when it is level. You can shoot more accurately at longer distances by ensuring your rifle is level. Activate the level by holding down the illumination push button for 15 seconds. Repeat to deactivate. The level feature also temporarily deactivates illumination when you rotate the scope over 30 degrees, so you can lay the rifle on its side to save battery power.
Guard-Ion Lens Coating
Water, dirt and fingerprint shedding lens coating. Extremely durable and scratch resistant.
Motion Sensor Technology (MST)
An important feature of select Illuminated reticle models is the Leupold-exclusive Motion Sensor Technology (MST). A single touch of the button or twist of the dial activates the illumination, offering several different intensity settings (depending on model) including a high/low indicator (FireDot reticles only). The reticle will automatically switch to “stand-by mode” after five minutes of inactivity, then reactivate whenever the rifle is moved. This eliminates the need for excess movement reaching for buttons, while extending battery life (powered by a readily available CR-2032 coin cell battery.
Push Button Illumination
One button brightness control with a high/low indicator keeps it simple.
Reversible Throw Lever
Clamps onto VX-6HD power selector to provide leverage for fast magnification changes, left or right handed.
CDS Custom Dial System
Leupold CDS™ models allow you to quickly dial your elevation to different sight-in ranges with a custom adjustment matched to your specific ballistics information. The CDS dials change out easily, allowing you flexibility with different loads, conditions and calibers. Every CDS dial features ¼-MOA click or 1 cm click (metric versions), finger adjustments and no adjustment covers to lose, making the VX-2, VX-3, VX-6 and VX-R even more accurate and rugged. How the CDS™ System Works The CDS System works by laser-inscribing your scope's elevation dial to match your load, velocity and conditions. Your scope will be in perfect synch with the way your rifle and load shoots, even for hand loads. Each CDS dial is unique, taking all practical ballistic and environmental factors into account:
Select models are available with our exclusive FireDot Reticle System in your choice of FireDot Duplex, FireDot Circle, Ballistic FireDot, FireDot LR Duplex, FireDot 4, FireDot Pig Plex, FireDot TMR and FireDot SPR. Once activated, the dot within the reticle illuminates with bright, sharp definition, while the rest of the reticle is non-illuminated. This combination leads your eye naturally to the center aiming point and makes target acquisition quick, precise, and simple.
Twilight Max HD Light Management System